Shank Chuck Tool
Shank Chuck Tool
Shank Chuck Tool
Shank Chuck Tool
Shank Chuck Tool
Shank Chuck Tool
Shank Chuck Tool

Shank Chuck Tool

You have seen it (or a prototype of it) in our fly tying videos. You have called and emailed and asked about it. And now it's (almost) here: the OPST Shank Chuck Tool. It took us a long time to dial this one in. The challenge was first, to make a tool that would fit with just about any vise on the planet. We succeeded. If this tool does not fit with your vise, we will refund your money. The second challenge was finding a tool that can both shanks and some tubes- by unscrewing the chuck housing, you can flip the inner chuck one way for shanks and the other way for tubes. The shank will hold shanks down to our Micro Shanks, which are 0.90mm in diameter. Tube adaptor inner diameter: 2mm.

SHARE THIS ITEM

OPST Shank Chuck Tool

construction ,which has 4 jaw, improves tight gripping and allows you easily secure shanks at any angle you like . By unscrewing the housing, you can flip the inner chuck to work for both shanks and tubes.

This tool is capable of holding shanks from 0.5mm to 1.2mm , tubes from 3.0mm to 3.5mm in diameter. (according to our own measurement)